Caterpillar — Caterpillar 10-140 Construction Equipment Maintenance Manual

97 SEBU7645-06 Operation Section Parking Lowering the Equipment with the Accumulator Charged Illustration 101 g00887108 Illustration 100 g00887145 The bypass valve is located at the center of the machine. If electrical power is available and the accumulator is The lift arms will start lowering when the bypass charged, the boom can be lowered from the operator station with the boom control lever. valve is opened. Keep personnel away from the front of the machine. 1. Turn the engine start switch key to the ON position. 2. Unlock the work tool lockout control. 3. Slowly, move the lift lever to the LOWER position in order to lower the boom slowly.

If the boom does not lower, the accumulaior is not charged. If the engine has been off for more than ten minutes and the engine is operable, start the engine and move the lift lever to the LOWER position. If there is no electrical power the boom must be lowered manually. See Operation and Maintenance Manual, “Lowering the Equipment with the g00102432 Accumulator Discharged” for more details. illustration 102 Lowering the Equipment with the Accumulator Discharged a clockwise direction. The square stem should be If there is no electrical power or the accumulator is not The lift arms will lower to the ground. charged, the boom cannot be lowered with the boom control lever.

The boom must be lowered manually. Slowly turn the square stem of the bypass valve in rotated 90 degrees.