Caterpillar — Caterpillar 10-140 Construction Equipment Maintenance Manual

98 SEBU7645-06 Operation Section Parking Wooo a o Hlustration 103 go0866588 Note: On a machine that is equipped with load check valves, press the top of the bucket lower switch in order to allow the bucket to lower when the bypass valve is opened. Slowly turn the square stem of the bypass valve in a counterclockwise direction. The square stem should be rotated 90 degrees. | i01727031 Leaving the Machine SMCS Code: 7000 1. Use the steps and the handholds when you get off the machine. Face the machine and use both hands. Make sure that the steps are clear of debris before you dismount. 2. Inspect the engine compartment for debris. Clean out any debris and paper in order to avoid a fire. 3.

Remove all flammable debris from the front bottom guard in order to reduce the fire hazard. Dispose of the debris properly. 4. Turn the battery disconnect switch to the OFF position. If the machine will not be operated for an extended period of a month or more, remove the battery disconnect switch key. 5. Install all covers and all vandalism locks.