PACCAR 270 — 5. Before installing the road wheel, carefully clean the mating edge of the wheel hub and the inn...

1. Chock the road wheels and posi- tion the jack under the appropriate axle, as close as possible to the wheel that is being changed. 2. Clean the wheel nuts or, if applica- ble, remove the protective cover from each wheel nut. 3. Loosen, but do not remove the wheel nuts. 4. Jack the axle until the road wheel(s) are clear of the ground. Remove the road wheel nuts and carefully detach the road wheel. 5. Before installing the road wheel, carefully clean the mating edge of the wheel hub and the inner edge of the spare wheel. Remove any burrs and traces of paint. Changing wheels Hub-piloted wheels have the following characteristics: Wheels with cylindrical bolt holes.

Wheel nuts with a loose (captive) flat thrust washer. It is recommended that suitable supports are positioned beneath the appropriate axle when jacking the vehicle. Locate the hydraulic jack under the road spring of the appropriate axle, as close as possible to the road wheel. WARNING! The road wheels and wheel nuts used on this vehicle are hub piloted; do not use any other type of road wheel or wheel nut Emergency repairs Wheels