Komatsu — 20 Testing and adjusting

TESTING AND ADJUSTING STANDARD VALUE TABLE FOR CHASSIS RELATED PARTS Applicable model PC130-6K + PC150LGP-6K SM rev. PC130/150LGP-6K 20-4 Cate- gory Item Measurement conditions Unit Standard value for new machine Service limit value Operating effort of control levers Boom control lever · Engine at full throttle · Hydraulic oil temperature: 45 – 55˚C · Fit push-pull scale to center of control lever knob to measure (LEVER) · Measure max. value to end of travel · Tip of pedal (PEDAL) Lever Pedal N {kg} 15.7 ± 2.9 {1.6 ± 0.3} Max. 24.5 {2.5} Arm control lever 15.7 ± 2.9 {1.6 ± 0.3} Max. 24.5 {2.5} Bucket control lever 12.7 ± 2.9 {1.3 ± 0.3} Max.

21.6 {2.2} Swing control lever 12.7 ± 2.9 {1.3 ± 0.3} Max. 21.6 {2.2} Travel control lever 24.5 ± 5.9 {2.5 ± 0.6} Max. 39.2 {4.0} 74.5 ± 14.7 {7.6 ± 1.5} (both FORWARD and REVERSE) Max. 107.9 {11} Hydraulic pressure Boom · Hydraulic oil temperature: Normal operations 45 - 55°C · Relief pres- Power max. sure with engine at full throttle (Relieve only Normal operations circuit be measured) Power max. · In heavy-duty operation mode Normal operations Power max. Relief on one side MPa {kg/ cm2} 31.9 + 2 .0 {325 +2 . 0 } 0 0 31.9 ± 2.5 {325 ± 25} 34.8 ± 1.0 {355 ± 10} 34.8 ± 2.5 {355 ± 25} Arm 31.9 + 2 .

0 {325 + 2 .0 } 0 0 31.9 ± 2.5 {325 ± 25} 34.8 ± 1.0 {355 ± 10} 34.8 ± 2.5 {355 ± 25} 31.9 + 2 . 0 {325 + 2 .0 } 0 0 31.9 ± 2.5 {325 ± 25} Bucket 34.8 ± 1.0 {355 ± 10} 34.8 ± 2.5 {355 ± 25} Swing 28.9 ± 1.5 {295 ± 15} 28.9 ± 1.5 {295 ± 30} Travel 34.8 ± 1.0 {355 ± 10} 34.8 ± 2.5 {355 ± 25} Control pump 2.9 + 0 .3 {30 + 5 } -0.4 -4 Max. 3.2 {37} Max. 2.4 {24} PC valve output pressure (servo piston input pressure) · Engine at Control levers at neutral full throttle · Hydraulic o teil mpera- 1-pump Normal operations ture: 45 - relief Power max.

55°C · In heavy- duty Control levers at neutral operation mode Travel speed Hi, rotating under no load 3.4 ± 0.5 {35 ± 5} 3.4 ± 0.6 {35 ± 6} 16.0 ± 1.5 {163 ± 15} 16.0 ± 2.5 {163 ± 25} 17.5 ± 1.5 {178 ± 15} 17.5 ± 2.5 {178 ± 25} LS differential 2.7 + 1 .0 {28 + 1 0 } -0.7 -7 — 2.2 ± 0.1 {22.5 ± 1} —