Cummins — TIMING TOOL INSTALLATION

Injection Timing - General Information Engine Assembly (00-02) N14 Page 0-86 Compare the reading of the injector push rod travel in- dicator to the specification listed for the timing code. NOTE: The push rod travel indicator is read in a counter- clockwise direction from (zero). The total amount of travel represents the injection timing value. If the injection timing is not within the specified limits, check the following: 1. Is the timing tool correctly installed? 2. Are the dial indicators correctly adjusted? 3. Has the crankshaft been rotated in the correct direc- tion and timing sequence? 4. Are the cam follower housing capscrews correctly tight- ened? 5.

Are the crankshaft and camshaft gears in proper alignment? NOTE: To verify the correct injection timing for a particular engine, check the injection timing code on the engine dataplate. To acquire the timing specifications, refer to the Control Parts List (CPL) Manual, Bulletin No. 3379133. If the indicator reading is higher than the specification, the timing is retarded (2). If the indicator reading is lower than the specification, the timing is advanced (1).