Engine Assembly (00-02) Rocker Lever Housing - Installation N14 Page 0-99 Install the water tubes (A) in the front of the No. 2 and No. 3 rocker lever housings. Install the plugs (B) in the front of the No. 1 rocker lever housing and in the rear of the No. 3 rocker lever housing. Install new rocker lever housing gaskets on the cylinder heads. Install the rocker lever housings. Tighten the rocker lever housing capscrews in the se- quence shown (1 through 6). Torque Value: 115 [85 ft-lb] Tighten the rocker lever housing capscrews in the se- quence shown (7 and 8). Torque Value: 47 [35 ft-lb]