Cummins — VALVE CROSSHEADS - INSTALLATION

Engine Assembly (00-02) Valve Crossheads - Installation N14 Page 0-103 Install the push tubes in the corresponding numbered location. On CELECT™engines, take care to route the injector solenoid leads to avoid contact with the valve and injector push tubes. Twist the injector connector three turns to twist the lead wires. Connect the injector solenoid connector lead to the pass through connector in the rocker housing. Push the con- nector lead into the connector until the retainer seats. Valve Crossheads - Installation Install the valve crossheads in their original location and orientation. Lubricate the valve stems with clean 15W-40 oil.