Cummins — PISTON COOLING NOZZLES - INSTALLATION

Engine Assembly (00-02) Piston Cooling Nozzles - Installation N14 Page 0-139 Use the hoist to move the weight of the engine off of the rebuild stand. Remove the capscrews that hold the engine to the adapter plate. Install the engine on two engine support stands, Part No. ST-163. Piston Cooling Nozzles - Installation Use vegetable oil to lubricate the new o-rings. Do not soak the new o-rings in engine oil. Install the o-rings in the groove of the piston cooling nozzle. Install 4 inch X 3/8-16 guide studs in the capscrew holes. Install the nozzles in the cylinder block. NOTE: Make sure the oil passage opening in the piston cooling nozzle is pointing up toward the piston. Caution:

Do not use the capscrew to pull the nozzle into the cylinder block. Nozzle and o-ring damage or external oil leaks can result. Remove the guide studs.