Gear Cover - Cleaning and Inspection (01-19) Cylinder Block N14 Page 1-70 Remove the straight thread o-ring plug. Caution: The aluminum gasket surface can be easily damaged if caution is not used when removing gasket material. An oil leak will result. Use a gasket scraper to remove all gasket material. Use a medium crocus cloth to remove burrs from the capscrew holes and the gasket surface. Warning: When using a steam cleaner, wear protective clothing and safety glasses or a face shield. Hot Steam can cause serious personal injury. Steam clean the gear cover, and dry it with compressed air. Inspection Visually inspect the gear cover for cracks or damage.