Cummins — DISASSEMBLY

Cylinder Head Cylinder Head - Rebuild (02-02) N14 Page 2-11 Use a pencil magnet to remove the valve collets. Discard the valve collets. Slowly release the pressure on the valve spring. Remove the valve spring retainer. Remove the valve spring(s). Remove the valve stem seal. Remove the valves. NOTE: Mark the location of the valves with an engraving tool as they are removed. The intake and exhaust valves are manufactured from different materials. The exhaust valves can be installed in the intake valve location. Do not install the intake valves in the exhaust location. Repeat the procedure to remove the remaining valve collets, retainers, springs, stem seals, and valves.

Remove the pipe plugs and the fuel fittings from the cylinder head. Use an expansion plug removal tool, Part No. 3823159, to remove the expansion plugs. NOTE: Expansion plugs must be removed from the head casting for cleaning purposes.