Cylinder Head - Rebuild (02-02) Cylinder Head N14 Page 2-12 Cleaning Warning: Use protective measures to prevent personal injury. Install the cylinder head and the parts in a tank of clean- ing solution. NOTE: Follow the cleaning solution manufacturer’s instruc- tions when cleaning the parts. Remove the cylinder head and parts from the cleaning tank. Use fuel passage cleaning brush, Part No. ST-876, to clean the fuel and the oil passages with solvent. Dry with compressed air. Visually inspect the fuel and the oil passages to make sure they are clean. Clean the combustion deck exhaust and the intake man- ifold gasket surfaces with a Scotch-Brite W , Part No.
3823258, or its equivalent and diesel fuel or solvent. Clean with solvent. Dry with compressed air.