Cummins — CLEANING

Cylinder Head Cylinder Head - Rebuild (02-02) N14 Page 2-13 Use a straight edge and a 0.003-inch feeler gauge to measure the flatness of the cylinder head gasket surface. Flatness Per 25.4 mm [1.00 in] of Length mm in 0.020 MAX 0.0008 Flatness Per Total Overall Length mm in 0.08 MAX 0.003 NOTE: If the cylinder head is worn more than the maximum specified above, the cylinder head must be resurfaced. Re- fer to the Alternative Repair Manual, Bulletin No. 3379035. Measure the thickness of the cylinder head. Cylinder Head Thickness mm in 110.74 MIN 4.360 111.43 MAX 4.387 Measure the free height of the valve spring. Free Height (A) Valve Spring Part No. mm Limit in. 3070460 87.88 MAX 3.460