Cylinder Head - Replacing the Valve Guides (02-03) Cylinder Head N14 Page 2-26 Assembly Measure the outside diameter of the new valve guides. Valve Guide O.D. mm in 19.088 MIN 0.7515 19.101 MAX 0.7520 NOTE: Oversize valve guides have identification grooves on the outside diameter of the guide. The 0.25 mm [0.010-inch] oversize guide has one groove. The 0.38 mm [0.015-inch] oversize guide has two grooves. Use valve guide driver (1), Part No. 3823909, and an arbor press to install the new valve guides. Measure the new valve guide installed height above the cylinder head top deck surface.
Valve Guide Height (Installed) mm in 31.75 MIN 1.250 32.76 MAX 1.290 Measure the new valve guide inside diameter. Valve Guide I.D. (Installed) mm in 9.662 MIN 0.3804 9.713 MAX 0.3824 NOTE: If the valve guide is not within the specifications given, the valve guide must be removed and a new valve guide installed.