Cummins — CLEANING AND INSPECTION

Rocker Lever Housing Assembly Rocker Lever - Cleaning and Inspection for Reuse (03-01) N14 Page 3-9 Visually inspect the shaft for cracks or damage. Light fretting is typically found on the underside of the shaft and is not harmful, provided it meets the dimen- sional specifications. Measure the rocker lever shaft’s outside diameter in the bushing wear area. Rocker Lever Shaft O.D. mm in 34.823 MIN 1.3710 34.862 MAX 1.3725 Replace the rocker lever shafts as necessary. Visually inspect to see that the expansion plug is in place. Use steam or solvent to clean the rocker levers, and dry with compressed air. NOTE: Make sure to blow out the oil passages.

Visually inspect the rocker levers for cracks or unusual wear. Inspect the adjusting screw threads for damage.