Cummins — REMOVAL

Rocker Lever Housing Assembly Metri-Pack Pass Through Connector - Replacement (03-08) N14 Page 3-21 Tighten the hexagon nut to grip the dowel. Mount the slide hammer on the 1/4-inch dowel remover and pull the dowel. Installation Caution: Do not use a hammer or damage to the dowel will result. Use a mallet to install the ring dowels and pin dowels. Metri-Pack Pass Through Connector - Replacement (03-08) Removal The Metri-Pack pass through connectors connect the actuator harness to each of the injector solenoid wires in the rocker lever housing.