Cummins — INSPECTION

Lubricating Oil Pump - Rebuild (07-06) Lubricating Oil System N14 Page 7-14 Visually inspect the bushings in the oil pump body and the cover for damage. Measure the inside diameter of the bushings in the oil pump body and cover. Bushing I.D. mm in 22.263 MIN 0.8765 22.314 MAX 0.8785 NOTE: If the bushings are worn larger than the maximum given, the bushings must be replaced. Measure the high oil pressure relief valve seat depth in the oil pump body. Valve Seat Depth mm in 46.73 MAX 1.840 NOTE: If the valve seat depth is greater than the maximum specification given, the oil pump body must be replaced. Visually inspect the bushings in the driven gear for dam- age.

Measure the inside diameter of the bushings in the oil pump driven gear. Bushing I.D. mm in 22.263 MIN 0.8765 22.314 MAX 0.8785 NOTE: If the bushings are worn larger than the maximum given, the bushings must be replaced. Visually inspect the drive shaft and the driven shaft for damage.