Lubricating Oil System Lubricating Oil Cooler Assembly - Rebuild (07-11) N14 Page 7-37 Install the oil cooler core on the oil cooler transfer con- nection (housing) by inserting the transfer tubes into the o-ring adapters. NOTE: Make sure the o-ring adapters move freely when the transfer tubes are inserted as this will allow tubes to be centered in the adapters. Install the oil cooler core mounting gaskets and hold down capscrews. Tighten the hold down capscrews. Torque Value: 27 [20 ft-lb] Alternately tighten the o-ring adapter retainer capscrews. Torque Value: 47 [35 ft-lb] Install a new o-ring on the coolant filter shutoff valve.