Cooling System Water Pump Idler Assembly - Rebuild (08-04) N14 Page 8-17 Visually inspect the idler shaft for grooves, nicks, or dam- age. Inspect the adjusting screw and the mounting nut threads for wear or distortion. Measure the outside diameter (1) of the bearing press fit area of the idler shaft. Idler Shaft O.D. mm in 24.980 MIN 0.9835 24.993 MAX 0.9840 Visually inspect the bearing retaining ring, idler pulley cover, capscrew, and washer for cracks or damage. Discard damaged parts. Assembly Fill the space between the bearing races and the roller bearings with Chevron SRI grease or its equivalent. Prepare the outside diameter surface of the bearing with Locktite W Primer T, Part No.
ST-1272-13. Apply a thin film of Locktite W 609, Part No. 3823718, to the outside diameter of the bearing.