Cummins — INSPECTION

Accessory Drive Gear - Replacement (09-03) Drive Units N14 Page 9-10 If the end clearance is not within specifications, make sure the coupling is positioned tightly against the clamp- ing washer. Accessory Drive Gear - Replacement (09-03) Disassembly Install the shaft and gear assembly in an arbor press with the part number side of the gear facing upwards. Caution: Do not let the shaft fall when removing it from the drive gear. Damage to the shaft or personal injury can occur. Push the shaft from the gear. Cleaning Clean the parts with solvent. Dry with compressed air. Inspection Visually inspect the gear for cracks, chipped, or broken teeth.

Inspect the bore of the gear for fretting or burrs. NOTE: If the fretting, burrs, or raised material can not be removed with a fine crocus cloth, replace the gear.