Drive Units Accessory Drive Pulley - Cleaning and Inspection for Reuse (09-04) N14 Page 9-13 Accessory Drive Pulley - Cleaning and Inspection for Reuse (09-04) Cleaning Clean the accessory drive pulley with solvent. Dry with compressed air. Inspection Visually inspect the pulley for cracks, wear in the belt grooves, or other damage. If the oil seal wear surface on the accessory drive pulley wear sleeve is mutilated or has a groove worn deep enough that it can be felt with a fingernail, the wear sleeve must be replaced. Refer to Accessory Drive Pulley Wear Sleeve - Replacement (09-05). Accessory Drive Pulley Wear Sleeve - Replacement (09-05) Removal Caution:
The jaws of the vise must have copper plates to prevent damage to the pulley. Clamp the accessory drive pulley in a vise.