Engine Disassembly (00-01) Fuel Crossovers - Removal N14 Page 0-37 Remove the rocker lever housings. Remove the gaskets. NOTE: On CELECT™engines while handling the rocker lever housings, protect the wiring harness pass through connectors. Do not subject the pass through connectors to impact forces and do not rest the housing on the face with the pass through connectors. Fuel Crossovers - Removal Remove the four capscrews from each of the two fuel crossovers, and remove the fuel crossovers. Remove and discard the four o-rings. Cylinder Heads - Removal Remove the 12 capscrews and washers from each cyl- inder head. Warning:
Because this part weighs more than 23 kg [50 lbs], two people or a hoist will be required to lift the cylinder heads to avoid personal injury. Lift the cylinder heads from the block, and remove the cylinder head gaskets. Caution: To prevent damage to the head gasket sur- face, put the cylinder heads on wooden blocks when they are removed.