Crankshaft - Installation Engine Assembly (00-02) N14 Page 0-48 Adjust the position of the cylinder block so that the re- maining mounting holes in the adapter plate (2) and (3) align with the capscrew holes in the cylinder block. Use your fingers to tighten the three 1/2-13 X 3 3/8-inch capscrews (2). Install four 3/8-16 X 3 3/8-inch capscrews in the location shown (3). Use your fingers to tighten the capscrews. Tighten all of the adapter plate mounting capscrews in the sequence shown. Torque Value: 3/8-inch 41 [30 ft-lb] 1/2-inch 102 [75 ft-lb] 5/8-inch 102 [75 ft-lb] Crankshaft - Installation The main bearing shells are three different widths.
The narrow main bearing shells fit locations Nos. 2, 4, and 6. The wide main bearing shells fit locations Nos. 1, 3, and 5. The widest main bearing shell fits the No. 7 location.