hitachi — Scan tool communication circuit system check

Electronic control fuel injection system (Common rail type) 1E-145 Scan tool communication circuit system check CAN HIGH CAN LOW Engine control module (ECM) KWP2000 52 E-57 38 E-57 37 E-57 4 E-57 3 E-57 1 E-57 43 E-57 62 E-57 81 E-57 18 E-57 6 FL-150 7 FL-150 DLC 4 FL-150 5 FL-150 Machine control unit CAN HIGH CAN LOW TSWG0074 Circuit description Damage of connector lock Poor contact between terminal and wire Damaged harness Visually check the harness for damage. Check the relevant items on the scan tool data display while moving the connector and the harness which are related to the sensor. The variation of the display indicates the faulty part.

The engine control module (ECM) performs KW communication with the scan tool via 16-pin data link connector (DLC). Diagnostic aid If the intermittent trouble is suspected, followings may be the cause. Improper connection of harness connector Defective harness routing Worn harness cladding Wire disconnection inside harness cladding Following inspections are necessary to detect these causes. Improper connection of harness connector and ECM connector Poor connection of terminal from connector Unmatched terminals are fitted.