hitachi — DTC: P0092/P1292 (Flash code 217/218) PCV circuit fault (PCV1+B short circuit / PCV2+B short circuit / PCV2+B short circuit)

Electronic control fuel injection system (Common rail type) 1E-199 DTC: P0092/P1292 (Flash code 217/218) PCV circuit fault (PCV1+B short circuit / PCV2+B short circuit) (*: Specifications (fuse current value etc.) vary depending on each machine. Refer to the machine manual.) H-6 5 (15A)* Main relay 0.75 R/L 1 E-162 1 E-161 PCV2 PCV1 2 E-162 2 E-161 0.75 R/W 0.75 R/B 2 1 H-6 H-6 97 E-56 89 E-56 105 E-56 113 E-56 Engine control module (ECM) TSWG0077 Description of circuit The pressure control valve (PCV) controls the fuel feed pressure amount to the common rail.

Once the PCV installed to the supply pump receives the signal (voltage), the PCV closes the valve and pressure feed the fuel from the supply pump to the common rail. The engine control module (ECM) operates the PCV to adjust the common rail pressure. Preconditions when DTC is set Main relay power supply voltage is 16V or more. DTC P0091 or P0092 is not detected. DTC P1292 is not detected. 300 rpm or more, or actual rail pressure exceeds target rail pressure.

DTC set condition Main trouble symptom PCV1, 2 monitor signal fault (fixed to High) Intense engine vibration Rough idling Output lowering Engine blow up fault Black smoke emitted Action taken when DTC is set Trouble is displayed on the monitor of the machine or diagnosis lamp comes on.