hitachi — DTC: P0237 (Flash code 32) Boost sensor pressure fault (low voltage fault, open circuit)

Electronic control fuel injection system (Common rail type) 1E-305 DTC: P0237 (Flash code 32) Boost sensor pressure fault (low voltage fault, open circuit) 5V Boost pressure sensor signal Engine control module (ECM) 5V Boost temperature sensor signal 74 E-56 91 E-56 E-56 95 E-56 109 15 H-20 H-20 17 8 H-20 16 H-20 0.75 B/R 0.75 R/L 0.75 R/W 0.75 R/L 0.75 L 2 E-163 E-163 1 1 E-75 2 E-75 3 E-75 Boost temperature sensor Boost pressure sensor TSWG0079 Description of circuit The ECM provides 5 V to the boost pressure sensor through 5-V power supply circuit, and grounds to the inside of the ECM through ground circuit.

Also, the boost pressure sensor outputs the signal voltage to the ECM through boost pressure sensor signal circuit. The ECM detects a low boost condition (the engine load is low) when the signal voltage from the boost pressure sensor is low, and a high boost condition (the engine load is high) when the signal voltage from the boost pressure sensor is high. The ECM sets the DTC when the signal voltage from the boost pressure sensor is less than the normal range. The boost pressure sensor is installed to the intake manifold. The boost pressure sensor outputs the voltage corresponding to the internal pressure of the intake manifold, and the ECM detects the boost by this signal.

The boost pressure sensor includes following circuits. 5-V power supply circuit Ground circuit Boost pressure sensor signal circuit