Electronic control fuel injection system (Common rail type) 1E-551 Step Action Value YES NO 21 Replace the ECM. Note: EGR valve position learning is required after replacing or rewriting the ECM. Refer to “Engine Control System, Engine control module (ECM), Installation of ECM” in this section for learning of EGR. Is the procedure completed? — Go to Step 24. Go to Step 22. 22 Restore the ECM to its original condition of before replacement. Note: EGR valve position learning is required after replacing or rewriting the ECM. Refer to “Engine Control System, Engine control module (ECM), Installation of ECM” in this section for learning of EGR. Is the procedure completed? — Go to Step 23.
— 23 Check the mechanical part of the engine, and repair if faulty. • Compression pressure • Valve system • Flywheel • Camshaft gear • Timing gear • Related part of piston/crank Is the procedure completed? — Go to Step 24. Go to Step 2. 24 Repair the machine, and check the repair. Is the procedure completed? — Verify repair. —