Electronic control fuel injection system (Common rail type) 1E-553 About high-altitude correction ECM calculates the current altitude based on the barometric pressure sensor signal. It regulates the opening/closing period of PCV or electric conduction of injector according to the altitude etc. at this time, to correct the optimum fuel flow. Fuel flow limit (mm /st) 3 Barometric pressure kPa(psi) highland TSWG0173 Step Action Value YES NO 1 Perform the OBD system check. Is the procedure completed? — Go to Step 2. Go to “OBD system check”. 2 1. Make sure that the engine coolant temperature does not exceed 108°C (226°F). 2. Examine and repair the cause of overheat. 3.
Lower the engine coolant temperature to make sure that the output lowering has corrected. Is the procedure completed? — Go to Step 22. Go to Step 3. 3 Check driving environment. Fuel flow may be limited by correction when driving at high altitude. Did you drive at high altitude? — Contact Hitachi Construction Machinery for countermeasure. Go to Step 4. 4 Check if excessive load is applied to the machine side. Repair or replace the faulty part. Note: Refer to the machine’s manual for check and repair. Is the procedure completed? — Go to Step 5. — 5 Check the fuel. 1. Replace the fuel in the fuel tank and pipe. 2. Start the engine, operate the machine, and check for trouble symptom.
Is the engine symptom corrected? — Go to Step 22. Go to Step 6.