hitachi — Exhaust gas contains a lot of white smoke.

Electronic control fuel injection system (Common rail type) 1E-559 Step Action Value YES NO 13 1. Check the version of ECM software. 2. Rewrite the software if version upgraded is necessary. Refer to “How to use flash tool” in this section for check and rewriting of ECM. Note: EGR valve position learning is required after replacing or rewriting the ECM. Refer to “Engine Control System, Engine control module (ECM), Installation of ECM” in this section for learning of EGR. Is the procedure completed? — Go to Step 16. Go to Step 14. 14 Replace the ECM. Note: EGR valve position learning is required after replacing or rewriting the ECM.

Refer to “Engine Control System, Engine control module (ECM), Installation of ECM” in this section for learning of EGR. Is the procedure completed? — Go to Step 16. Go to Step 15. 15 Restore the ECM to its original condition of before replacement. Is the procedure completed? — Go to Step 16. — 16 Check the mechanical part of the engine, and repair if faulty. • Compression pressure • Valve system • Injector • Timing gear • Related part of piston/crank Is the procedure completed? — Go to Step 17. — 17 Repair the machine, and check the repair. Is the procedure completed? — Verify repair. Go to Step 2.