1E-52 Electronic control fuel injection system (Common rail type) Step 12-1 After entering the password, press [ENTER] key. The password for 6WG1 is “SLNPTL6”. The password for 4/6HK1 is “SLNPTL4”. Entering wrong password will return to the previous menu. Step 13-1 The numbers will appear on the screen. Obtain the ID code from Hitachi Construction Machinery service center by using this number (6855 in this case). Enter the obtained ID code (2495 in this case). Note: The ID code you have entered will appear on the screen, suffixed with “0”. The clock of Tech2 must be correctly set. After entering, press [ENTER] key.
TSWG0225 Step 12-2 If the password you have entered is correct, press the softkey [Okay]. Enter the password within 120 seconds. Failure to enter the password within 120 seconds will return to Step 11. TSHK0057 Step 14 When the ID code matches, the following screen will appear. Press the softkey “Next”. This step can be performed only when the engine speed is 0 rpm. TSWG0226 Step 13 After completing the password registration, proceed to ID registration. TSHK0058