hitachi — Rewrite setting of Q adjust correction data by Tech2

Electronic control fuel injection system (Common rail type) 1E-53 Step 15 Displays the three-point Q adjust data in the ECM. Step 15-2 If the Q adjust data you have entered is correct, press the softkey “Program”. 1. To modify the Q adjust data, press the softkey “Change”. TSHK0100 TSHK0059 Step 15-3 If the Q adjust data you have entered is off the set value, the message shown as Step 15-4 appears. Step 15-1 If the Q adjust data you have entered is correct, press [ENTER] key. 1. The entry conditions are as follows. Conditions: C/Rail system entry setting is “1 15”. TIS system entry setting is “1 8”. TSHK0101 TSHK0099