Engine Mechanical (6WG1 (Common rail)) 1B-53 Valve spring Measure the perpendicularity of the valve spring. Valve spring perpendicularity (mm) 23. Remove the nozzle sleeve O-ring. Inspection Idle gear/ shaft C Measure the outer diameter of the idle gear shaft and clearance between shaft and bush. Inspect the bush for damage. Shaft outer diameter (mm) Measure the free length of the valve spring. Valve spring free length (mm) Clearance between shaft and bush (mm) Measure the tension of the spring when installing it. Standard Limit Intake 3.5 4.8 Exhaust 4.5 6.2 Nominal dimension Limit 49 48.85 Nominal dimension Limit Intake 79.3 75.3 Exhaust 102.7 97.6 Standard Limit 0.04 ~ 0.105 0.20