hitachi — Inspection

Engine Mechanical (6WG1 (Common rail)) 1B-55 Valve thickness (mm) Valve seat hit width (mm) Important: After repairing by grinding, if the thickness of the valve is greater than that specified by the limit, replace it. Valve seat insert Measure the amount of valve sink. Insert a new valve into the guide, and measure the sink amount from the cylinder head installation face to the valve surface. Amount of valve sink (mm) Legend 1. Hit width 2. Valve thickness Bridge guide Measure the clearance between the bridge guide and bridge (1). Clearance between guide and bridge (mm) Legend 1. Amount of sink 2. Cylinder head 3.

Valve seat insert Nominal dimension Limit Intake 2.02 1.52 Exhaust 2.48 1.98 Nominal dimension Limit Intake 3.3 3.7 Exhaust 2.6 3.0 Nominal dimension Limit Intake 0.4 1.4 Exhaust 0.3 1.3 Standard Limit 0.020 ~ 0.057 0.10