Engine Mechanical (6WG1 (Common rail)) 1B-57 Notes: After installing the valve seal, check that the spring is not loose or deformed. Installer; Valve stem seal for intake: 1-8522-1140-1 Installer; Valve stem seal for exhaust: 1-8522-1184-0 5. Install the valve guide. Apply engine oil to the full outer circumference of the valve guide. Use a replacer to force in the valve guide so that it is the standard height from the cylinder head surface. Valve guide height from the cylinderhead surface. (mm) 7. Install the valve. Inserting the valve Apply engine oil to the valve stem, and insert the valve into the cylinder head. Replacer; Valve guide:
9-8523-1202-0 Valve hit inspection Apply a red lead primer to the valve insert, and inspect the hit width on the sheet surface. Also inspect whether the hit position is in the center of the valve seat. Insert and valve hit width Legend 1. 29.0 mm 2. 27.0 mm 6. Use a installer to install the valve guide to the valve stem seal. Standard Intake 27.0 Exhaust 29.0