1B-62 Engine Mechanical (6WG1 (Common rail)) Legend 1. Liquid gasket length 2. Liquid gasket width 3. Liquid gasket application position 4. Oil hole 5. Liquid gasket length 6. Liquid gasket width 7. Cylinder head 8. Gear case (head) 9. Head gasket rubber ring position 10. Edge of the gear case (head) hole as a standard Legend 1. Gear case 2. Liquid gasket application position 3. Liquid gasket width 4. Liquid gasket length 5. Oil hole 6. Liquid gasket length 7. Cylinder block 8. Edge of the gear case hole as a standard b. Apply liquid gasket to the cylinder block side.
In line with the gear case and cylinder head match surfaces, apply liquid gasket using the edge of the gear case hole as a standard, with a width of approx. 5 mm, height of approx. 3~4 mm, and length of approx. 30 mm. Liquid gasket : TB1207B Be careful not to plug-up the oil hole shown in the diagram. Assemble the cylinder head within 15 minutes of applying the liquid gasket. Legend 1. Liquid gasket application position