Engine Mechanical (6WG1 (Common rail)) 1B-67 Legend 1. Liquid gasket application position 2. Cylinder head 3. Gear case (head) Legend 1. O-ring 2. Connector 10. Install the nozzle leak off pipe. Install the adapter to the lower cover rear side and install the nozzle leak off pipe to the injector. b. Tighten the insert arrow bolt in the gasket cover slot. Tightening torque: 15 N m {1.5 kgf m} Tightening torque Adapter: 20 N m {2.0 kgf m} Eyebolt: 15 N m {1.5 kgf m} 9. Install the harness connector. Insert the O-ring and install the connector to the lower cover. Tightening torque: 20 N m {2.0 kgf m} Legend 1. Nozzle leak off pipe 2. Connector 11. Install the injector harness.