hitachi — Inspection

1B-98 Engine Mechanical (6WG1 (Common rail)) Piston Piston abrasion and cracking inspection Wipe off any carbon sludge from the piston and clean the piston. Places that are difficult to see such as the piston ring slot should be carefully inspected. Perform red check method inspections whenever necessary. Piston ring tension measurement Use a piston ring tension gauge to measure the tension. Measure the oil ring with a coil expander ring mounted. Piston ring tension Piston pin outer diameter measurement Measure the outer diameter of the piston pin, and measure the clearance between the piston pin and piston pin hole, and the clearance between the piston pin and connecting rod bush.

Measure the 6 points of the piston pin shown in the diagram. Standard N {kgf} Limit N {kgf} Top ring 27.5 ~ 41.2 {2.81 ~ 4.20} 24.5 {2.5} Second ring 22.8 ~ 34.1 {2.32 ~ 3.48} 19.6 {2.0} Third ring 28.1 ~ 36.6 {2.87 ~ 3.73} 19.6 {2.0} Oil ring 46.3 ~ 57.7 {4.72 ~ 5.88} 39.2 {4.0}