Engine Mechanical (6WG1 (Common rail)) 1B-101 Grade selection measurement position (from major-axis piston head): 113 mm Clearance between piston and liner (major axis direction) Standard (replacement parts): 0.156 ~ 0.190 mm Legend 1. Cylinder block inner diameter bore grade marking position liner replacement (Reference) Match the cylinder block bore diameter and liner diameter grade. Using the number written on the right side surface of the cylinder block, select a 1x for 1 or 2, or a 3x for 3 liner and install it. Cylinder block and liner combination 2. Apply oil to the piston boss. 3. Install the piston pin and connecting rod to the piston. Block inscribed number Liner grade 1 ⋅2 1x 3 3x