1C-14 Cooling system (6WG1 (Common rail)) Inspection Shaft Impeller Inspect the shaft damage or wear. Inspect the impeller for corrosion, and the seal unit contact surface for wear, damage etc. Assembly Bearing 1. Set the water pump body. 2. Install the oil seal. Apply engine oil to the inner side and outer circumference part of the oil seal lip. While taking care not to bend it out of shape, face the lip section upwards and push it into the water pump body. Inspecting the bearing for de-bonding, wear, and abnormal noises For de-bonding inspections: Inspect the full circumference from the ball clearance to the lace for scratches or de-bonding. For wear inspections:
Inspect the ball and lace sections for unusual shakiness or rattling. For abnormal noise inspections: Rotate the bearing with your hand to see if you can feel anything unusual. 3. Install the bearing (large). 4. Install the shaft. Apply engine oil to the shaft, and push the bearing into the shaft using a press.