hitachi — Inspection

Intake system (6WG1 (Common rail)) 1J-13 Insert Legend 1. Joining section 2. Insert 3. Piston ring Fit a brand new piston ring firmly into the insert, and measure the piston ring joining section clearance. If the measured clearance falls outside of the standard value, replace the insert. Piston ring joining section clearance Parts for replacement when disassembling Piston ring (C) Piston ring (T) O-ring O-ring Limit:

0.05 ~ 0.25 mm Maintenance standard table Maintenance items Name value Standard Standard Clearance Limit Clearance Notes Bearing insertion section inner diameter for the bearing housing φ20.5 φ20.506 Bearing External diameter φ20.382 Internal diameter φ12.042 Length 11.94 Shaft & turbine wheel's Journal diameter φ12.0 φ11.996 Shaft & turbine wheel concentricity 0.015 Piston ring mitre clearance 0.05 ~ 0.25 With the piston ring fixed in the insert Shaft & turbine wheel and turbine housing clearance 0.39 ~ 1.0 Shaft & turbine wheel shaft orientation clearance 0.075 ~ 0.155 Shaft & turbine wheel and turbine back plate clearance 0.48 ~ 0.92