MAN — Removing and installing vibration damper, changing front crankshaft seal

Removing and installing vibration damper, changing front crankshaft seal Removing vibration damper D Block the crankgear Fig. 1 Remove fan and fan hub. Release the tension and take off the V-belt, see page 113. 1 4312 Fig. 2 Remove the mounting bolts from the front V-belt pulley and take it off. 2 4345 Fig. 3 Loosen mounting bolts on vibration damper. Note: Owing to the high tightening torque a rein- forced socket in conjunction with a 1/2” tool is required. Prior to removal mark the position of the vibration damper relative to the crankshaft. 3 4344 Fig. 4 Remove vibration damper carefully. 4 3478 55