Removing and installing vibration damper, changing front crankshaft seal Exchanging of crankshaft seal at front Fig. 5 Remove cover. Replace front crankshaft seal only as a complete unit, i.e. race and radial shaft seal. 5 3479 Fig. 6 To remove the race, a puller (special tool, see page 126, Pos. 13) is necessary. 8 2718 Fig. 7 Pull off race. 7 3480 Fig. 8 Special tools are required for installing the race (see page 126, item 15). Clean inner side of race and crankshaft stub. Coat crankshaft stub with sealing agent ”Antipor 46”. D Push race Ж and pressing sleeve З onto adapter В . D Tighten spindle А in adapter В with nut Г . D Bolt adapter В to crankshaft. 10 3091 56