REMOVING THE WORKING TOOL CAUTION Always keep the tool at a minimum distance from the ground during any unlocking procedure to avoid dangerous movements. Deflect right joystick 3 (fig. 5) toward e and extend the bucket cylinder fully (fig. 13 and 14). Switch on the additional attachment function rotating device by actuating push button S19 (fig. 3) (indicator light on the button lights up). 13 Depress the push-button switch S47 (fig. 4) and keep it depressed. When switch S47 is depressed, press right push-button S5R on left joystick 4 (fig. 6) until the locking pins (fig. 1, pos. b) are fully inserted. The symbol locking pins retracted appears on the screen and the buzzer sounds.
Release switch S47. DANGER There is no rigid connection between the coupler and the tool present. The tool can be released. To avoid dangerous movements, keep the tool at a minimum distance from the ground. 14 Slowly retract bucket cylinder and lay the tool on the ground (fig.15 and 16). Deactivate push button S19. 15 16 8.2. 6