Kaiyi — Kaiyi Hydraulic Systems Maintenance Manual

5. MAIN HYDRAULIC PUMP FLOW TEST 5. MAIN HYDRAULIC PUMP FLOW TEST В SPECIFICATION SPECIFICATION Oil temperature 45 Ь 5 C (113 Ь F) Engine speed 2230 Ь 25 rpm Test pressure 200 Ь 5 bar (2900 psi ) Maximum pump flow 246 / min (65 gpm ) P T В FLOW METER GAUGE AND TOOL FLOW METER GAUGE AND TOOL Gauge 0~35 MPa (0~350 bar , 0~5000 psi ) Temperature reader Flow meter 1) Make test connections. MCV 2) Install temperature reader. (see temperature reader installation procedure in this group) 3) Heat hydraulic oil to specifications. (see hydraulic oil warm up procedure in this group) Hyd tank Main pump 4) Run engine at test specifications.

5) Close flow meter loading valve to increase pressure to test specifications. 6) Read flow meter. If flow is below specifications, check suction line and suction pressure for abnormality before removing pump. 7) 760F6WE29 6-56