Kaiyi — Kaiyi Hydraulic Systems Maintenance Manual

8. LOADER CYLINDER DRIFT TEST 8. LOADER CYLINDER DRIFT TEST В SPECIFICATION SPECIFICATION Oil temperature 45 Ь 5 C (113 Ь 9 F) Boom horizontal Bucket horizontal Bucket unloaded B В GAUGE AND TOOL GAUGE AND TOOL Stop watch Temperature reader Put the pilot cut off switch in the OFF Put the pilot cut off switch in the OFF position. position. Do not go under the work equipment. Do not go under the work equipment. A A : Retraction of boom cylinder rod B : Retraction of bucket cylinder rod 1) Set the boom and bucket horizontal, then stop the engine. 2) Stop the engine, wait for 5 minutes, then start measuring. 3) Measure the amount the boom and bucket cylinder rods retract during 15 minutes.

7577AWE31 6-59 Item Standard value Retraction of boom cylinder rod 15 mm Retraction of bucket cylinder rod 24 mm