106 SEBU8726-03 Maintenance Section Fuel System Primary Filter (Water Separator) Element - Replace 6. Tighten the vent screw (1) securely . Remove the wiring harness from connection (4). 8. Rotate the filter element counterclockwise and remove the filter element (5). Clean the filter bowl. Install the Element Illustration 66 g03374223 Typical example 7. Using a suitable tool, remove the filter bowl (6). Rotate the filter assembly counterclockwise in order to remove the filter assembly. Use a suitable tool in order to remove the filter assembly. Illustration 67 g03374224 Typical example 1. Locate the thread in the filter element (8) onto the threads (9). Spin on the element. Do not tighten.
2. Lubricate the O ring seal (7) with clean engine oil. Do NOT fill the bowl with fuel before the assembly is installed. 3. Do NOT use a tool in order to install the filter assembly. Tighten the filter bowl (6) by hand. Install the filter bowl (6) and align with your temporary marks (A). 4. Tighten the valve (2) securely. Remove the container and dispose of the fuel in a safe place.