94 SEBU8726-03 Maintenance Section Coolant Level - Check i05149389 Coolant Level - Check Engines With a Coolant Recovery Tank Note: The cooling system may not have been provided by Perkins. The procedure that follows is for typical cooling systems. Refer to the OEM information for the correct procedures. Check the coolant level when the engine is stopped and cool. NOTICE When any servicing or repair of the engine cooling system is performed, the procedure must be per- formed with the engine on level ground. Level ground will allow you to check accurately the coolant level. This checking will also help in avoiding the risk of in- troducing an air lock into the coolant system.
Illustration 52 g02590196 Filler cap 4. Clean the filler cap and the receptacle. Reinstall the filler cap and inspect the cooling system for leaks. 1. Observe the coolant level in the coolant recovery tank. Maintain the coolant level to COLD FULL mark on the coolant recovery tank. Note: The coolant will expand as the coolant heats up during normal engine operation. The additional volume will be forced into the coolant recovery tank during engine operation. When the engine is stopped and cool, the coolant will return to the engine. Pressurized System: Hot coolant can cause seri- ous burns.
To open the cooling system filler cap, stop the engine and wait until the cooling system components are cool. Loosen the cooling system pressure cap slowly in order to relieve the pressure. Engines Without a Coolant Recovery Tank 2. Loosen filler cap slowly in order to relieve any pressure. Remove the filler cap. Check the coolant level when the engine is stopped and cool. 3. Pour the correct coolant mixture into the tank. Refer to the Operation and Maintenance Manual, “Refill Capacities and Recommendations” for information on the correct mixture and type of coolant. Refer to the Operation and Maintenance Manual, “Refill Capacities and Recommendations” for the engine cooling system capacity.
Do not fill the coolant recovery tank above COLD FULL mark. Illustration 53 g00285520 Cooling system filler cap