MAINTENANCE MAINTENANCE PROCEDURE REPLACE FEED PUMP PRE-FILTER CARTRIDGE WARNING After replacing the pre-filter cartridge, install the fuel hose and check that there is no leakage of fuel. Do not bring any flame close. 1. Remove cover (1). 2. Close stop valve (2). 3. Remove clip (3) and hose (4), then remove filter cartridge (5). 4. Install new filter cartridge (5), then connect hose (4) and install clip (3). 5. Open stop valve (2). 6. Install cover (1). 7. After completing the replacement of the feed pump pre- filter cartridge, bleed the air from the fuel line. For details of the procedure for bleeding the air, see "PROCEDURE FOR BLEEDING AIR (PAGE 4-63)". 4-25