John Deere 400 6076 — John Deere 400 6076 User Manual

Cylinder Block, Liners, Pistons and Rods/Measure Cylinder Block 2. Measure cam follower bore diameter at all bore locations. Record measurements by bore location. CAMSHAFT FOLLOWER AND BORE SPECIFICATIONS Cam Follower Bore ID . . . . . . . . . . . . . . . . . . . 17.384—17.440 mm (0.6845—0.6865 in.) Cam Follower OD . . . . . . . . . . . . . . . . . . . . . . . 17.33—17.35 mm (0.682—0.683 in.) Maximum Cam Follower-to-Bore Clearance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.114 mm (0.0045 in.) If any one cam follower bore is not within specification, install a new cylinder block. S11,2010,JV -19-12APR93 3.

Measure camshaft bore diameter at all locations and record readings. Compare measurements with specifications given in chart below: 10 33 CAMSHAFT BUSHING AND BORE SPECIFICATION Camshaft Bushing Installed ID . . . . . . . . . . . . . 67.076—67.102 mm (2.6408—2.6418 in.) Camshaft Bushing Bore in Block . . . . . . . . . . . . 69.987—70.013 mm (2.7554—2.7564 in.) Maximum Runout of Camshaft Bushing Bore in Block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.038 mm (0.0015 in.) New Camshaft Bushing-to-Journal Clearance . . . . . . . . . . . . . . . . . . . . . . . . . . .

0.063—0.115 mm (0.0025—0.0045 in.) RG5830 -UN-12AUG91 If camshaft bushing bore diameter in block is more than specified, install a new cylinder block. RG,CTM42,G10,22-19-14FEB95 CTM42 (24MAR95) 10-33 6076 Diesel Engines—S.N. (500000— ) 160101 PN=118