John Deere 400 6076 — John Deere 400 6076 User Manual

Cylinder Block, Liners, Pistons and Rods/Recheck Cylinder Liner Standout (Height above Block) RECHECK CYLINDER LINER STANDOUT (HEIGHT ABOVE BLOCK) NOTE: If a new liner assembly is being installed in a new or used cylinder block, liner height must be checked. Be sure liner bore in cylinder block and top deck of block are clean. 1. Install liners without O-ring. Secure with cap screws and washers and measure liner standout. See MEASURE CYLINDER LINER STANDOUT (HEIGHT ABOVE BLOCK), earlier in this group. Liner shims may be used to bring to bring standout within specification.

(See INSTALL LINER SHIMS—IF REQUIRED, later in this group.) 10 35 RG,CTM42,G10,23-19-22JUL94 CTM42 (24MAR95) 10-35 6076 Diesel Engines—S.N. (500000— ) 160101 PN=120