Cooling System/Disassemble Water Pump 2. Remove fitting (A) and water bypass tube. 3. Remove water inlet manifold elbow cap screws (B) and water pump mounting cap screws (C). NOTE: Oil dipstick may have to be removed to provide clearance for water pump removal. Rotate water pump inlet downward and lift inlet manifold elbow up between block and dipstick tube while sliding water pump to the rear. Some applications may be different. RG5837 -UN-13AUG91 4. Slide water pump nose out of cylinder block flange bore. Remove O-ring.
RG,CTM42,G25,12-19-29OCT92 DISASSEMBLE ENGINE WATER PUMP 25 15 RG5847 -UN-13AUG91 A—Cover D—O-Ring G—Bearing J—Drain Valve B—Housing E—Impeller H—Seal (Oil) K—Weep Hole Filters (2 C—Gasket F—Seal (Water Pump) I—Drive Gear used) CTM42 (24MAR95) 25-15 6076 Diesel Engines—S.N. (500000— ) RG,CTM42,G25,13-19-23FEB93 160101 PN=234